Arbortech Allsaw Blades

ARBORTECH ALLSAW BLADES

The Arbortech ALLSAW is backed by a wide selection of Quick Switch blades, each engineered for different cutting needs. Compatible with both the AS200X and BA200X models, these blades can be swapped out in seconds, giving you the flexibility to take on a variety of masonry, restoration, and landscaping tasks with one tool.

General Purpose Blades - Standard & XL

The General Purpose Blades, in Standard and XL, are versatile options for brick, mortar, and masonry cutting. The Standard blades suit everyday jobs, while the XL version provides extra depth for larger cuts and landscaping.

200X General Purpose Blades (Standard):

Depth: 110mm (4 3/8”)
Width: 7.2mm (9/32”)
For chasing mortar, cutting openings, and toothing brickwork.

200X XL General Purpose Blades:

Depth: 170mm (6 3/4”)
Width: 7.2mm (9/32”)
For deeper masonry cuts and large openings.
Can also cut roots or timber through soil and sand.

Discover

Tuckpointing Blades

The Tuckpointing Blades are designed for fast and controlled mortar removal, making them ideal for repointing and restoration projects. They remove a shallow layer of mortar with minimal damage to surrounding brickwork.

200X Tuckpointing Blades:

Depth: 35mm (1 3/8”)
Width: 9.5mm (3/8”)
Perfect for repointing by removing a consistent layer of mortar between bricks.
Used in restoration to prepare joints for fresh mortar without chipping or cracking the brick.

Discover

Plunge Blades

The Plunge Blades are made for precise plunge cuts in bricks and mortar, allowing for single brick removal and deep, square cuts without overcutting.

200X Plunge Blades:

Depth: 120mm (4 3/4”)
Width: 7.2mm (9/32”)
For removing individual bricks cleanly.
Creates deep, square masonry cuts while avoiding overcuts in corners.

Discover

Headjoint Blades

The Head Joint Blades are built for precise mortar removal in shorter or vertical joints, making them well-suited for fine tuckpointing work.

200X Head Joint Blades:

Depth: 75mm (3”)
Width: 3mm (1/8”)
For precision tuckpointing in tight areas.
Removes mortar cleanly from short or vertical joints.

Discover

Heritage Blades

The Heritage Blades are designed for historic restoration work, handling thin mortar joints with precision while protecting surrounding brickwork.

200X Heritage Blades:

Depth: 75mm (3”)
Width: 3mm (1/8”)
Suited to restoration projects on older or delicate brickwork.
Removes thin mortar joints cleanly without damaging adjacent bricks.

Discover

Switchbox Blades

The Switchbox Blade is made for creating neat, square openings in masonry where small fittings or fixtures are required.

200X Switchbox Blade:

Designed for cutting accurate square holes into brick or mortar.
Commonly used in electrical work for installing switch boxes, sockets, and other compact fittings.
Produces clean, well-defined cuts that reduce extra finishing or patching.

Discover

Dust Boot

The Heavy Duty Dust Boot is designed for dust control in sensitive work environments, maintaining clean operation without compromising visibility or precision.

200X Heavy Duty Dust Boot:

Compatible with BA200X and AS200X models.
Works with Plunge, Switch, and General Purpose blades.
Accordion design ensures effective dust removal at any blade depth.
Open nose allows clear visibility of the blade for accurate cutting.
Heel markers aid with alignment for precise cuts.
Built with a durable wear guard for long-lasting performance.

Discover

Turf Blades

The 200X Turf Blades are purpose-built for professionals maintaining grass surfaces, offering clean, accurate cuts that support healthy turf. Ideal for use on sports grounds, parks, and landscaped areas, they make routine trimming and in-ground maintenance quicker and more consistent.

200X Turf Blades:

Depth: 170mm (6 ¾”)
Width: 5mm (13/64”)
Suited to groundskeepers, turf managers, and irrigation specialists.
Delivers sharp, reliable cuts to keep green spaces in top condition

Discover

MORE ARBORTECH

ARBORTECH

ALLSAW AS200X (CORDED)

ARBORTECH

ALLSAW BA200X (CORDLESS)